Nanjing SanLe Microwave Technology Development Co.,Ltd
Contact US
ADD: Room 1509, Buliding A, Changzhou World Trade Centre, No.16 Yanzheng Middle Avenue, Jiangsu, China
MOB: +8615161172851
TEL : +86-519-81090878
CK619 Continuous Wave Cavity Magnetron Magnetron Generator 10KW

CK619 Continuous Wave Cavity Magnetron Magnetron Generator 10KW

CK619 continuous wave cavity magnetron magnetron generator 10KW The energy output device Energy output is generated in the interaction space of microwave energy to the load to the device. The energy output device (no loss, no breakdown by microwave, ensure pipe vacuum seal, and must be connected...

    CK619 continuous wave cavity magnetron magnetron generator 10KW


    Model

    CK-619

    Frequency range (f)

    2450±50MHz

    Filament voltage when preheating

    8.5±0.7V

    Filament current when preheating

    47A

    Filament current when working

    36A

    Anodic voltage

    ≤10kV

    Anodic current

    ≤1.6A

    Output power

    ≥10kW

    Load VSWR

    ≤2.5:1

    Cooling mode

    water cooling

    Energy transport mode

    BJ—22 waveguide output

    Efficiency

    ≥66%


    The energy output device Energy output is generated in the interaction space of microwave energy to the load to the device. The energy output device (no loss, no breakdown by microwave, ensure pipe vacuum seal, and must be connected to external systems. Coaxial output USES mostly small power continuous wave magnetron anode resonator in the high frequency magnetic field is the strongest. Place a coupling ring, when across the ring to the flux change, will produce high-frequency induced current in the ring, and the high frequency power to the outside of the ring. The stronger the coupling ring area, the greater the coupling. Commonly used high power continuous wave magnetron axial energy output, output antenna through the pole shoe hole connected to the anode on the wing. An antenna into strips or round rods can also be used for the cone. The antenna was output window seal. Output window commonly used low loss characteristics of glass or ceramics. It need not to ensure lossless microwave energy through and has good vacuum tightness. High power tube output window forced air cooling is commonly used to reduce due to the heat generated by the dielectric loss.


    Should you're interested in our ck619 continuous wave cavity magnetron magnetron generator 10kw, welcome to check the quotation with us. We're one of the leading manufacturers of various microwave equipment, offering you the customized service. Don't hesitate any more.

Inquiry