Nanjing SanLe Microwave Technology Development Co.,Ltd
Contact US
ADD: Room 1509, Buliding A, Changzhou World Trade Centre, No.16 Yanzheng Middle Avenue, Jiangsu, China
MOB: +8615161172851
TEL : +86-519-81090878
CK-2131 Continuous Wave Cavity Magnetron Magnetron Parts 3KW

CK-2131 Continuous Wave Cavity Magnetron Magnetron Parts 3KW

CK-2131 continuous wave cavity magnetron magnetron parts 3KW Magnetron cathode electron emitter, and a component interaction space.The performance of the cathode has enormous influence on the properties of pipe work and life, is regarded as the heart of the whole pipe.A lot of more phyletic, the...

    CK-2131 continuous wave cavity magnetron magnetron parts 3KW

    Magnetron cathode electron emitter, and a component interaction space.The performance of the cathode has enormous influence on the properties of pipe work and life, is regarded as the heart of the whole pipe.A lot of more phyletic, the performance of cathode.Is commonly used in continuous wave magnetron directly heated cathode, it is composed of tungsten filament or pure tungsten filament winding into spiral shape, electric heat flow to specified temperature and then have the ability to launch electronic.The cathode with short heating time and the advantages of electron impact resistance is strong, widely used in the continuous wave magnetron.The cathode heating current is big, requires short and thick, cathode lead connection part to good contacts.High power tube cathode lead work when the temperature is very high, often forced air cooling heat dissipation.Magnetron cathode by negative pressure at work, therefore lead part should have good insulation performance and can meet the requirements of the vacuum seal.To prevent overheat the anode by electronic back to boom, magnetron after working stability should be in accordance with the provisions, reduce the cathode current to prolong service life.


    Model

    CK-2131

    Frequency range (f)

    2445±15MHz

    Filament voltage when preheating

    4.0V

    Filament current when preheating

    22A

    Filament current when working

    1.8V

    Anodic voltage

    5.1±0.2kV

    Anodic current

    ≤850mA

    Output power

    ≥3KW

    Load VSWR

    ≤2.0:1

    Cooling mode

    water cooling

    Energy transport mode

    BJ—26 waveguide output

    Efficiency

    ≥63%


    Should you're interested in our ck-2131 continuous wave cavity magnetron magnetron parts 3kw, welcome to check the quotation with us. We're one of the leading manufacturers of various microwave equipment, offering you the customized service. Don't hesitate any more.

Inquiry