Nanjing SanLe Microwave Technology Development Co.,Ltd
Contact US
ADD: Room 1509, Buliding A, Changzhou World Trade Centre, No.16 Yanzheng Middle Avenue, Jiangsu, China
MOB: +8615161172851
TEL : +86-519-81090878
CK-2121 Continuous Wave Cavity Magnetron Advantages of Microwaves 2KW

CK-2121 Continuous Wave Cavity Magnetron Advantages of Microwaves 2KW

Ck-2121 continuous wave cavity magnetron 5KW Magnetron anode resonance system besides the electromagnetic oscillation can produce need, also can produce different characteristics of various electromagnetic oscillation.For the magnetron stable job on the required pattern, commonly used "type...

    Ck-2121 continuous wave cavity magnetron 5KW


    Model

    CK-2121

    Frequency range (f)

    2445±15MHz

    Filament voltage when preheating

    4.6V

    Filament current when preheating

    20A

    Filament current when working

    3.3V

    Anodic voltage

    4.0±0.2kV

    Anodic current

    ≤725mA

    Output power

    ≥2kW

    Load VSWR

    ≤2.5:1

    Cooling mode

    water cooling

    Energy transport mode

    BJ—26 waveguide output

    Efficiency

    ≥63%


    Magnetron anode resonance system besides the electromagnetic oscillation can produce need, also can produce different characteristics of various electromagnetic oscillation.For the magnetron stable job on the required pattern, commonly used "type isolation belt" to isolate the interference pattern. Every type with the anode foil an interval of a connected, in order to increase working mode and the frequency interval between adjacent interference pattern.In addition, due to the energy exchange of electronic also has a certain energy, these electrons on anode plate temperature, the more electronic anode collect (that is, the greater the current), or electronic energy (energy conversion rate is lower, the greater the anode temperature is higher, therefore, the anode needs to have good capability of heat dissipation. Usually power tube using forced air cooling, anode with heat sink. High power tube is multi-purpose water cooling, cooling jacket on anode

    Should you're interested in our ck-2121 continuous wave cavity magnetron advantages of microwaves 2kw, welcome to check the quotation with us. We're one of the leading manufacturers of various microwave equipment, offering you the customized service. Don't hesitate any more.

Inquiry