Nanjing SanLe Microwave Technology Development Co.,Ltd
Contact US
ADD: Room 1509, Buliding A, Changzhou World Trade Centre, No.16 Yanzheng Middle Avenue, Jiangsu, China
MOB: +8615161172851
TEL : +86-519-81090878
CK-2111 Continuous Wave Cavity Magnetron Magnetron Projects 30KW

CK-2111 Continuous Wave Cavity Magnetron Magnetron Projects 30KW

CK-2111 continuous wave cavity magnetron magnetron projects 30KW Whatever equipment require magnetron output load as far as possible do match, its voltage standing wave ratio should be as small as possible.Standing wave big not only reflected power, it was able to actually received power is...

    CK-2111 continuous wave cavity magnetron magnetron projects 30KW

    Whatever equipment require magnetron output load as far as possible do match, its voltage standing wave ratio should be as small as possible.Standing wave big not only reflected power, it was able to actually received power is reduced, and can cause magnetron moding and cathode overheating, serious when pipe damage.Moding, anode current suddenly appear.The causes of moding besides pattern separation degree of small pipe itself, mainly has the following several aspects(1) power resistance is too large, high light and arouse the PI model.(2) load serious mismatch, adverse phase reflection reduces the high frequency field and electron flow interaction, and cannot maintain normal PI mold oscillation.(3) lack of filament heating, cause the launch is insufficient, or because of the tube is deflated the emission cathode poisoning is insufficient, can't provide PI for mould oscillation tube current.To avoid the happening of the moding, request power resistance is too large, the load should be match, the filament heating current should comply with the specifications


    Model

    CK-2111

    Frequency range (f)

    2450±20MHz

    Filament voltage when preheating

    6.4±0.3V

    Filament current when preheating

    66A

    Filament current when working

    3A

    Anodic voltage

    ≤13kV

    Anodic current

    ≤3.3A

    Output power

    ≥30kW

    Load VSWR

    ≤1.15:1

    Cooling mode

    water cooling

    Energy transport mode

    BJ—22 waveguide output

    Efficiency

    ≥70%


    Should you're interested in our ck-2111 continuous wave cavity magnetron magnetron projects 30kw, welcome to check the quotation with us. We're one of the leading manufacturers of various microwave equipment, offering you the customized service. Don't hesitate any more.

Inquiry