Nanjing SanLe Microwave Technology Development Co.,Ltd
Contact US
ADD: Room 1509, Buliding A, Changzhou World Trade Centre, No.16 Yanzheng Middle Avenue, Jiangsu, China
MOB: +8615161172851
TEL : +86-519-81090878
CK-2091 Continuous Wave Cavity Magnetron Magnetron Part for Microwave 15KW

CK-2091 Continuous Wave Cavity Magnetron Magnetron Part for Microwave 15KW

CK-2091 continuous wave cavity magnetron magnetron part for microwave 15KW Now commonly used in the microwave heating equipment magnetron on incentive cavity excitation transmission system directly.Incentive cavity is energy excitation equipment, but also a part of the transmission system.So the...

    CK-2091 continuous wave cavity magnetron  magnetron part for microwave 15KW


    Model

    CK-2091

    Frequency range (f)

    2450±30MHz

    Filament voltage when preheating

    8.5±0.7V

    Filament current when preheating

    47A

    Filament current when working

    29A

    Anodic voltage

    ≤12.6kV

    Anodic current

    ≤1.8A

    Output power

    ≥15kW

    Load VSWR

    ≤2.0:1

    Cooling mode

    water cooling

    Energy transport mode

    BJ—22 waveguide output

    Efficiency

    ≥66%


    Now commonly used in the microwave heating equipment magnetron on incentive cavity excitation transmission system directly.Incentive cavity is energy excitation equipment, but also a part of the transmission system.So the performance of the cavity on the magnetron has enormous influence on the work.Should motivate cavity will be generated inside the microwave energy effectively transferred to the load.To this end, in addition to the design of incentive cavity itself, the bore of the pipe in motivating assembly is a strong impact on the stability of the work.Work properly when the anode contact with incentive cavity part of the pipe has a lot to the high frequency current through, must have a good contact between the two, poor contact will cause high frequency spark.The depth of the antenna into incentive cavity directly affect the transmission of energy and the working state of the tube, should be stipulated in the instruction manual carefully assembled.


    Should you're interested in our ck-2091 continuous wave cavity magnetron magnetron part for microwave 15kw, welcome to check the quotation with us. We're one of the leading manufacturers of various microwave equipment, offering you the customized service. Don't hesitate any more.

Inquiry